ETM 120
ROTARY DRAW BENDER
ROTARY DRAW BENDER
Our rotary draw bender ETM 120 machine is equipped with state of the art technologies meant to bend with or without mandrel tubes and profiles, and capable of bending both in right and left direction using dedicated toolings.
It allows to bend tubes with a range diameter up to 114 x 8 mm and it can make curves over 180° with top finish quality.
This machine is manufactured from single steel block and the tools are machined from solid steel. It can also have the option of fitting hydraulic vice and positioner.
The system of counter formers is specifically designed to reduce mechanical effort and to make the bending operation faster than other brands machines of the same category, thus granting a very good finishing even when bending very thin wall thicknesses.
Specification | ETM 60 | ETM 80 | ETM 90 | ETM 120 | ETM 150 |
---|---|---|---|---|---|
Motor power | KW 2 | KW 2,2 | KW 2,2 | KW 5,5 | KW 8 |
Rotation speed * | 6 g/1’ * | 3,5 g/1’ * | 3 g/1’ * | 0-5 g/1’ * | 0-5 g/1' * |
Gears | Oil-bath | Oil-bath | Oil-bath | Oil-bath | Oil-bath |
Wieght | 210 kg | 560 kg | 800 kg | 2100 kg | 5100 kg |
Size | 600 x 500 x 950 h. | 1100 x 810 x 1200 h. | 1300 x 870 x 1250 h. | 1550 x 1050 x 1010 h. | 1500 x 1000 x 1400 h. |
MATERIAL | ETM 60 | ETM 80 | ETM 90 | ETM 120 | ETM 150 |
---|---|---|---|---|---|
FE 430 | 60 x 4 | 76 x 6 | 90 x 6 | 114 x 8 | 168 x 10 |
Aluminium | 60 x 8 | 76 x 8 | 90 x 10 | 140 x 7 | 168 x 15 |
INOX AISI 304 | 60 x 3 | 76 x 4 | 90 x 4 | 114 x 6 | 168 x 7 |
Solid Bar FE 430 | 45 | 55 | 65 | 85 | 120 |
Square Tube FE | 50 x 3 | 60 x 4 | 80 x 4 | 110 x 5 | 140 x 6 |
Every ETM series machine is supplied with the “Digital Bend Programming Touch Screen 2” special software, extremely easy to use due to the intuitive “Touch” screen.
Thanks to the latest generation technologies it is possible to access main features as: