ETM 76

Tube & pipe bending machine without mandrel

Tube bender ETM76 is equipped with state of the art technologies meant to bend with or without mandrel tubes and profiles, and capable of bending both in right and left direction using dedicated toolings. It allows to bend tubes with a range diameter up to 76 x 3 mm and it can make curves over 180° with top finish quality for a minimum bending radius of 3x the tube diameter.

This machine is manufactured from single steel block and the toolings are machined from solid steel. It can also have the option of fitting hydraulic vice and positioner.

  • Curvatubi ETM 76

The system of counter formers is specifically designed to reduce mechanical effort and to make the bending operation faster than other brands machines of the same category, thus granting a very good finishing even when bending very thin wall thicknesses.

Technical specifications

SpecificationETM 60ETM 76ETM 90ETM 120ETM 150
Motor powerKW 2KW 4KW 2,2KW 3,5KW 5,5
Rotation speed *5 g/1’ *5 g/1’ *3 g/1’ *1 g/1’ *0,5 g/1' *
GearsA bagno d’olioA bagno d’olioA bagno d’olioA bagno d’olioA bagno d’olio
Wieght210 kg270 kg800 kg1050 kg2500 kg
Size600 x 500 x 950 h.850 x 620 x 890 h.900 x 800 x 1000 h.1200 x 900 x 1200 h.1700 x 1400 x 1600 h.

Maximum capacity (mm)

MATERIALETM 60ETM 76ETM 90ETM 120ETM 150
FE 3760 x 4
76 x 3
90 x 6114 x 8168 x 7
Steel ST3560 x 370 x 490 x 5114 x 7168 x 6
Aluminium60 x 676 x 6100 x 8140 x 9170 x 9
INOX AISI 30860 x 374 x 390 x 5114 x 5150 x 6
Solid Bar FE 3740455580110
Square Tube FE 3750 x 50 x 360 x 60 x 370 x 70 x 6110 x 110 x 5140 x 140 x 6

ETM SOFTWARE: tube bending software

Every ETM series machine is supplied with the “Digital Bend Programming Touch Screen” special software, extremely easy to use  due to the intuitive “Touch” screen.

Thanks to the latest generation technologies it is possible to access main features as:

  • Storage of 99 programs, each of them with a 5-stop sequence in the bending operation
  • Calculation of the machine maximum bending capacities with reference to the material size to be bent
  • Graphic of the minimum bending radii
  • Setting of springiness material estimate (springback)
  • Bend counter
  • Remote connection “Industry 4.0”

Some more functions:

  • Working mode: either manual or automatic
  • Change of measure unit: either inches or millimeters
  • 100 MB hard disk
  • Alarm diagnosis
  • Maintenance notice
ETM 60 braccio rinforzo

Tie Rod

ETM contromatrice a slitta

Slide countermold

ETM 60 Comando pedale

Foot control

ETM 60 Display posizione cromatrice

Digital display countermold position

ETM 60 posizionatore

Positioner

ETM posizionatore automatico CNC

Automatic CNC
positioner