It’s a compact tube bender with high performances, equipped with state of the art technologies meant to bend with or without mandrel tubes and profiles, and capable of bending both in right and left direction using dedicated toolings.
It allows to bend tubes with a range diameter from 8 mm up to 60 x 4 mm and it can make curves over 180° with top finish quality.
The rotary draw bender ETM 60 machine is manufactured from single steel block and the toolings are machined from solid steel. It can also have the option of fitting hydraulic vice and positioner.
The system of counter formers is specifically designed to reduce mechanical effort and to make the bending operation faster than other brands machines of the same category, thus granting a very good finishing even when bending very thin wall thicknesses.
|Specification||ETM 60||ETM 80||ETM 90||ETM 120||ETM 150|
|Motor power||KW 2||KW 2,2||KW 2,2||KW 5||KW 12|
|Rotation speed *||6 g/1’ *||3,5 g/1’ *||3 g/1’ *||1 g/1’ *||0,5 g/1' *|
|Gears||A bagno d’olio||A bagno d’olio||A bagno d’olio||A bagno d’olio||A bagno d’olio|
|Wieght||210 kg||560 kg||800 kg||1050 kg||2500 kg|
|Size||600 x 500 x 950 h.||810 x 1100 x 1200 h.||870 x 1250 x 1300 h.||1200 x 1300 x 1300 h.||1700 x 1400 x 1600 h.|
Maximum capacity (mm)
|MATERIAL||ETM 60||ETM 80||ETM 90||ETM 120||ETM 150|
|FE 430||60 x 4||76 x 6||90 x 6||114 x 8||168 x 7|
|Aluminium||60 x 8||76 x 8||90 x 10||140 x 7||168 x 10|
|INOX AISI 304||60 x 3||76 x 4||90 x 4||114 x 6||168 x 5,5|
|Solid Bar FE 430||45||55||65||85||110|
|Square Tube FE||50 x 3||60 x 4||80 x 4||110 x 5||140 x 6|
Every ETM series machine is supplied with the “Digital Bend Programming Touch Screen 2” special software, extremely easy to use due to the intuitive “Touch” screen.
Thanks to the latest generation technologies it is possible to access main features as:
- Storage of 49 programs, each of them with a 8 stop sequences in the bending operation
- Calculation of the machine maximum bending capacities with reference to the material size to be bent
- Graphic of the minimum bending radii
- Setting of springiness material estimate (springback)
- Bend counter
- Remote connection “Industry 4.0”
Some more functions:
- Working mode: either manual or automatic
- Change of measure unit: either inches or millimeters
- 100 MB hard disk
- Alarm diagnosis
- Maintenance notice